Carbon Steel Checkered plate

Steel Plate
It is a flat steel that is poured with molten steel and pressed after cooling.
It is flat, rectangular, and can be rolled directly or cut from wide steel strips.
The steel plate is divided by thickness, thin steel plate <4 mm (the thinest 0.2 mm), medium thickness steel plate 4~60 mm, extra thick steel plate 60~115 mm.
Steel plate by rolling points, hot rolling and cold rolling.
The width of the sheet is 500~1500 mm; The width of the thick is 600 to 3000 mm. Sheet steel is divided into ordinary steel, high-quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. According to the professional use, there are oil drum board, enamel board, bulletproof board, etc.; According to the surface coating layer, there are galvanized sheet, tin plate, lead plate, plastic composite steel plate, etc.
Checked plate

Checker plate , also known as Tread plate and Diamond Plate Steel, is a type of metal stock with a regular pattern or lines on one side for

 slip resistance.[1] The most common alloy used for aluminum tread plate is 6061, although 5086-H34 and 3003-H231 are also used.Diamond plate is usually steel, stainless steel or aluminium. Steel types are normally made by hot rolling, although modern manufacturers also make a raised and pressed diamond design.

The added texture reduces the risk of slipping, making diamond plate a solution for stairs, catwalks, walkways, and ramps in industrial settings. Its non-skid properties mean that diamond plate is frequently used on the interior of ambulances and on the footplates of firetrucks. Additional applications include truck beds and trailer floors.

They can also be used decoratively, particularly highly polished aluminum variants. Manufactured in plastic, diamond plate is marketed 

as an interlocking tile system to be installed on garage floors, trailers, and exercise rooms.