Payment Type:L/C,T/T,D/P,Paypal
Incoterm:FOB,CFR,CIF,EXW,DDP,DDU
Min. Order:1 Metric Ton
Transportation:Ocean
Port:Qingdao port ,Shanghai port
Brand: Shijitongyuan
Warranty Service: None
After-sales Service: None
Engineering Solution Capability: None
Application Scenario: Warehouse, Hotel
Place Of Origin: China
Packaging: packing as requirements
Productivity: 50K TONS/MONTH
Transportation: Ocean
Place of Origin: China
Supply Ability: 10000tons
Certificate: SGS
Port: Qingdao port ,Shanghai port
Payment Type: L/C,T/T,D/P,Paypal
Incoterm: FOB,CFR,CIF,EXW,DDP,DDU
WHAT IS A36 MS Steel Sheet?
ASTM A36 steel sheet is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.
Overview:
ASTM A36 Steel Plate Mechanical Properties
YIELD POINT (KSI) TENSILE STRENGTH (KSI) MIN. 8" ELONGATION % A36 36 58-80 20
ASTM A36 Steel Plate Chemical Composition
UP TO 3/4" THICK |
|
CARBON MAX | 0.25% |
PHOSPHORUS MAX | 0.03% |
SULFUR MAX | 0.03% |
SILICON | 0.40% MAX |
COPPER MIN | 0.20% |
|
|
|
|
OVER 3/4" TO 1 1/2" THICK |
|
CARBON MAX | 0.25% |
MANGANESE | 0.80-1.20% |
PHOSPHORUS MAX | 0.03% |
SULFUR MAX | 0.03% |
SILICON | 0.40% MAX |
COPPER MIN | 0.20% |
|
|
|
|
OVER 1 1/2" TO 2 1/2" THICK |
|
CARBON MAX | 0.26% |
MANGANESE | 0.80-1.20% |
PHOSPHORUS MAX | 0.03% |
SULFUR MAX | 0.03% |
SILICON | 0.15-0.40% |
COPPER MIN | 0.20% |
|
|
|
|
OVER 2 1/2" TO 4" THICK |
|
CARBON MAX | 0.27% |
MANGANESE | 0.85-1.20% |
PHOSPHORUS MAX | 0.03% |
SULFUR MAX | 0.03% |
SILICON | 0.15-0.40% |
COPPER MIN | 0.20% |
|
|
|
|
OVER 4" THICK |
|
CARBON MAX | 0.29% |
MANGANESE | 0.85-1.20% |
PHOSPHORUS MAX | 0.03% |
SULFUR MAX | 0.03% |
SILICON | 0.15-0.40% |
COPPER MIN | 0.20% |
What is Mild Steel Sheet?
Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%. If any more carbon than that is added, the steel would be classified as cast iron.
Mild steel is not an alloy steel and therefore does not contain large amounts of other elements besides iron; you will not find vast amounts of chromium, molybdenum, or other alloying elements in mild steel. Since its carbon and alloying element content are relatively low, there are several properties it has that differentiate it from higher carbon and alloy steels.
Less carbon means that mild steel is typically more ductile, machinable, and weldable than high carbon and other steels, however, it also means it is nearly impossible to harden and strengthen through heating and quenching. The low carbon content also means it has very little carbon and other alloying elements to block dislocations in its crystal structure, generally resulting in less tensile strength than high carbon and alloy steels. Mild steel also has a high amount iron and ferrite, making it magnetic.
The lack of alloying elements such as those found in stainless steels means that the iron in mild steel is subject to oxidation (rust) if not properly coated. But the negligible amount of alloying elements also helps mild steel to be relatively affordable when compared with other steels. It is the affordability, weldability, and machinability that make it such a popular choice of steel for consumers.
Thickness | Hot Rolled Thickness:2.75mm-100mm, as Your Request Cold Rolled Thickness:0.2mm-3mm, as Your Request |
Width | 1250-2500mm,or as Your Request ( regular width 1000mm, 1250mm, 1500mm ) |
Coil ID | 508mm or 610mm |
Coil Weight | 3 - 8 ton or as Your Request |
Standard | ASTM EN DIN GB ISO JIS BA ANSI |
Steel Grade | Q195, Q215,Q235,Q345,ST37, A36, 45#, 16Mn, SPHC, SGCC,CGCC |
Technique | Hot rolled cold rolled as Your Request |
Surface Treatment | Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request |
Application | Applies to appliances construction, machinery manufacturing, container manufacturing, shipbuilding, bridges, etc. |
Package | Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet) |
Payment Term | Over $10,000, pay 30%T/T deposit in advance, 70%T/T the balance before shipment,under $10,000, pay in full by T/T. |
Remarks | Insurance per to Contract terms; |